Alcatel-Lucent OmniSwitch 6250 - Show Ip Multicast Group

IP Multicast Switching Commands
page 41-82 OmniSwitch 6250 CLI Reference Guide November 2009
show ip multicast group
Displays the IGMP group membership table entries of IP Multicast Switching and Routing for the speci-
fied IP multicast group address or all entries if no IP multicast group address is specified.
show ip multicast group [ip_address]
Syntax Definitions
ip_address IP multicast group address.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ip multicast group
Total 3 Groups
Group Address Source Address VLAN Port Mode Static Count Life
---------------+---------------+-----+-----+--------+-------+------+-----
231.0.0.3 1.0.0.5 1 2/1 exclude no 1 257
234.0.0.4 0.0.0.0 1 2/1 exclude no 1 218
229.0.0.1 0.0.0.0 1 2/13 exclude yes 0 0
-> show ip multicast group 234.0.0.4
Group Address Source Address VLAN Port Mode Static Count Life
---------------+---------------+-----+-----+--------+-------+------+-----
234.0.0.4 0.0.0.0 1 2/1 exclude no 1 218
Output fields are described here:
output definitions
Group Address IP address of the IP multicast group.
Source Address IP address of the IP multicast source.
VLAN The VLAN associated with the IP multicast group.
Port The slot and port number of the IP multicast group.
Mode IGMP source filter mode.
Static Whether it is a static multicast group or not.
Count Number of IGMP membership requests made.
Life Life time of the IGMP group membership.