Network Time Protocol Commands
page 5-8 OmniSwitch 6250 CLI Reference Guide November 2009
ntp broadcast-delay
Sets the broadcast delay time in microseconds.
ntp broadcast delay microseconds
Syntax Definitions
microseconds The number of microseconds for the broadcast delay.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
When running in the NTP client broadcast mode, a broadcast delay must be set. The broadcast delay is the
number of microseconds added to the timestamp.
Examples
-> ntp broadcast delay 1000
-> ntp broadcast delay 10000
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaNtpBroadcastDelay
parameter default
microseconds 4000
ntp broadcast Enables or disables the client’s broadcast mode.
To Next Page
Loading...
