IPv6 Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 30-11
ipv6 host
Configures a static host name to IPv6 address mapping to the local host table.
ipv6 host name ipv6_address
no ipv6 host name ipv6_address
Syntax Definitions
name Host name associated with the IPv6 address (1 - 255 characters).
ipv6_address IPv6 address.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of this command to remove the mapping from the host table.
Examples
-> ipv6 host Lab 4235::1200:0010
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaIPv6HostTable
alaIPv6HostName
alaIPv6HostAddress
alaIPv6HostRowStatus
show ipv6 hosts Displays IPv6 Local Hosts Table.
To Next Page
Loading...
