Power over Ethernet (PoE) Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 4-9
lanpower priority
Specifies an inline power priority level to a port. Levels include critical, high, and low.
lanpower slot/port priority {critical | high | low}
Syntax Definitions
slot/port The particular port on which a priority level is being configured.
critical Intended for ports that have mission-critical devices attached, and there-
fore require top (i.e., critical) priority. In the event of a power manage-
ment issue, inline power to critical ports is maintained as long as
possible.
high Intended for ports that have important, but not mission-critical, devices
attached. If other ports in the chassis have been configured as critical,
inline power to high-priority ports is given second priority.
low Intended for ports that have low-priority devices attached. In the event
of a power management issue, inline power to low-priority ports is
interrupted first (i.e., before critical- and high-priority ports).
Defaults
Platforms Supported
OmniSwitch 6250-Enterprise Models
Usage Guidelines
N/A
Examples
-> lanpower 2/16 priority low
Release History
Release 6.6.1; command was introduced.
parameter default
low | high | critical low
To Next Page
Loading...
