Alcatel-Lucent OmniSwitch 6250 - Show Vlan Ipmvlan Port-Config

IP Multicast VLAN Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 42-17
show vlan ipmvlan port-config
Displays the sender and receiver ports for a specific IP Multicast VLAN or all the IP Multicast VLANs.
show vlan ipmvlan [ipmvlan-id] port-config
Syntax Definitions
ipmvlan-id Specifies the IP Multicast VLAN number for which the sender and
receiver ports will be displayed. The valid range is 2–4094.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show vlan ipmvlan port-config
ipmvlan port type
+---------+--------+-----------+
50 2/1 receiver
50 2/10 sender
51 2/2 receiver
51 0/2 receiver
100 2/2 receiver
101 0/1 sender
-> show vlan ipmvlan 50 port-config
port type
+--------+-----------+
2/1 receiver
2/10 sender
-> show vlan ipmvlan 51 port-config
port type
+--------+-----------+
2/2 receiver
0/2 receiver