Alcatel-Lucent OmniSwitch 6250 - Chapter 7 Managing OmniSwitch 6250 Stacks

Chassis MAC Server (CMS) Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 3-11
show mac-retention status
Displays the MAC retention status.
show mac-retention status
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• If the administrative status of MAC retention is not configured, it will be displayed as disabled by
default.
• If the administrative status of the duplicate MAC address trap is not configured, it will be displayed as
disabled by default.
• If the source of the currently used MAC address is not configured, it will be displayed as EEPROM by
default.
Examples
-> show mac-retention status
MAC RETENTION STATUS
==============================================================================
Admin State : Enabled
Trap admin state : Enabled
Current MAC address : 00:0a:0b:0c:0d:0e
MAC address source : Retained
Topology Status : Ring present
output definitions
Admin State Displays the administrative status of MAC retention (Enabled or Dis-
abled).
Trap admin state Displays the administrative status of the duplicate MAC address trap
(Enabled or Disabled).
Current MAC address Displays the MAC address currently used by the switch.
MAC address source Displays the source of the currently used MAC address. Options
include EEPROM and Retained.
Topology Status Displays the topology status of the stack. Options include Ring present
and Ring Not Present.