Alcatel-Lucent OmniSwitch 6250 - Appendix A Regulatory Compliance and Safety Information; Declaration of Conformity: CE Mark

Session Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 6-3
session login-attempt
Sets or resets the number of times a user can attempt unsuccessfully to log into the switch before the TCP
connection is closed.
session login-attempt integer
Syntax Definitions
integer The number of times the user can attempt to log in to the switch before
the TCP connection is closed. Valid range is 1 to 10.
Defaults
Default is 3 login attempts.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> session login-attempt 5
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
sessionMgr
sessionLoginAttempt
show session config Displays Session Manager information such as banner file name,
session timeout value, and default prompt value.
session login-timeout Sets or resets the amount of time the user can take to accomplish a
successful login to the switch.
session timeout Configures the inactivity timer for a CLI, HTTP (including Web-
View), or FTP interface. When the switch detects no user activity
for this period of time, the user is logged off the switch.