Chassis Management and Monitoring Commands
page 2-34 OmniSwitch 6250 CLI Reference Guide November 2009
show chassis
Displays the basic configuration and status information for the switch chassis.
show chassis [number]
Syntax Definitions
number Specifies the slot (i.e., switch) number within a stack of switches. The
valid range of slot numbers is 1–8, depending on the size of the stack.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command may be used when logged into either the primary or secondary CMM.
Examples
-> show chassis
Chassis 1
Model Name: OS6250-24,
Description: 10/100/1000,
Part Number: 902274-10,
Hardware Revision: 002,
Serial Number: E23L9052,
Manufacture Date: JUN 09 2004,
Admin Status: POWER ON,
Operational Status: UP,
Number Of Resets: 115
Chassis 2
Model Name: OS6250-24,
Description: 10/100/1000,
Part Number: 902274-10,
Hardware Revision: 004,
Serial Number: 432L0008,
Manufacture Date: SEP 08 2004,
Admin Status: POWER ON,
Operational Status: UP,
Number Of Resets: 115
To Next Page
Loading...
