Ethernet OAM Commands
page 25-44 OmniSwitch 6250 CLI Reference Guide November 2009
show ethoam default-domain
Displays all the default MD information for all the VLANs or a specific VLAN.
show ethoam default-domain [vlan vlan_id]
Syntax Definitions
vlan_id VLAN ID for which the default MD information is required.
Defaults
By default, the default MD information for all VLANs is displayed..
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
Use the vlan_id parameter with this command to view information about the default MD for a specific
VLAN.
Examples
-> show ethoam default-domain
Vlan Mhf-creation Level
------+--------------+-------
1 none none
11 none none
99 none none
106 default 3
Release History
Release 6.6.1; command was introduced.
output definitions
Vlan The VLAN ID of the default MD.
Mhf-creation Indicates the MHF value for a VLAN that is part of the default MD
Options include none, explicit, or default.
Level The level of the maintenance domain.
To Next Page
Loading...
