Ethernet OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 25-43
Related Commands
MIB Objects
Dot1agCfmMep
dot1agCfmMepActive
dot1agCfmMepDirection
dot1agCfmMepPortNumber
dot1agCfmMepMacAddress
dot1agCfmMepFngState
dot1agCfmMepCcmEnabled
dot1agCfmMepCcmLtmPriority
dot1agCfmMepSomeRMepCcmDefect
dot1agCfmMepErrorCcmDefect
dot1agCfmMepXconCcmDefect
dot1agCfmMepSomeRdiDefect
dot1agCfmMepErrorCcmLastFailure
dot1agCfmMepXconCcmLastFailure
dot1agCfmMepErrMacStatus
dot1agCfmMepLtmNextSeqNumber
dot1agCfmMepFngAlarmTime
dot1agCfmMepFngAlarmTime
dot1agCfmMepLowPrDef
dot1agCfmMepHighestPrDefect
ethoam endpoint Creates an Ethernet OAM Maintenance End Point in the specified
MA.
ethoam endpoint admin-state Configures the administrative state of MEP.
To Next Page
Loading...
