QoS Policy Commands
page 39-180 OmniSwitch CLI Reference Guide November 2009
show policy network group
Displays information about pending and applied policy network groups.
show [applied] policy network group [network_group]
Syntax Definitions
applied Indicates that only network groups that have been applied should be
displayed.
network_group The name of the policy network group for which you want to display
information; or a wildcard sequence of characters for displaying infor-
mation about network groups with similar names. Use an asterisk (*) to
indicate a wildcard character.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Information for all policy network groups displays unless network_group is specified.
• The display may include any of the following characters:
Examples
-> show policy network group
Group Name: From Entries
Switch blt 4.0.1.166
10.0.1.166
143.209.92.166
192.85.3.1
+netgroup1 cli 143.209.92.0/255.255.255.0
172.28.5.0/255/255/255.0
character definition
+ Indicates a new policy network group.
- Indicates the policy network group is pending
deletion.
# Indicates that the policy network group differs
between the pending/applied network groups.
To Next Page
Loading...
