File Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 7-41
show tty
Displays current TTY settings.
show tty
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Shows the settings made with the tty command.
• This command can also be used on the secondary CMM.
Examples
-> show tty
lines = 24, columns = 80
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
systemServices
systemServicesTtyLines
systemServicesTtyColumns
tty Specifies the number of TTY lines and columns to be displayed.
To Next Page
Loading...
