Session Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 6-17
user profile save
Saves the user account settings for aliases, prompts, and the more mode screen setting. These settings will
be automatically loaded when the user account logs on.
user profile save
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Use this command to save alias definitions, prompt definitions, and more mode screen settings for use
in future login sessions for the current user account.
• If you do not use the user profile save, alias, prompt, and more size commands, settings are lost
when the user account logs off.
• Use the user profile reset command to set the alias, prompt, and more size values to their factory
defaults.
Examples
-> user profile save
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
N/A
alias Defines substitute command text for the switch’s CLI command
keywords.
prompt Defines substitute command text for the switch’s CLI command
keywords.
more size Specifies the number of lines that your console screen will display.
user profile reset Resets the alias, prompt and more values to their factory defaults.
To Next Page
Loading...
