Chassis MAC Server (CMS) Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 3-5
mac-retention dup-mac-trap
Enables or disables the duplicate MAC address trap status.
mac-retention dup-mac-trap {enable | disable}
Syntax Definitions
enable Enables the duplicate MAC address trap status.
disable Disables the duplicate MAC address trap status.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If the old primary switch is not detected and included in the stack within a pre-defined time period, an
SNMP trap will be generated.
Examples
-> mac-retention dup-mac-trap enable
Release History
Release 6.2.1; command was introduced.
Related Commands
MIB Objects
chasMacAddrRetentionObjects
chasPossibleDuplicateMacTrapStatus
Parameter Status
enable | disable disable
show mac-retention status Displays the MAC retention status.
To Next Page
Loading...
