IPv6 Commands
page 30-20 OmniSwitch 6250 CLI Reference Guide November 2009
ipv6 route-pref
Configures the route preference of a router.
ipv6 route-pref {static | rip} value
Syntax Definitions
static Configures the route preference of static routes.
rip Configures the route preference of RIPng routes.
value Route preference value.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Route preference of local routes cannot be changed.
• The valid route preference range is 1–255.
• The IPv6 version of BGP is not supported currently.
Examples
-> ipv6 route-pref static 2
-> ipv6 route-pref rip 60
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaIprmRtPrefTable
alaIprmRtPrefLocal
alaIprmRtPrefStatic
alaIprmRtPrefRip
parameter default
static value 2
rip value 120
show ipv6 route-pref Displays the configured route preference of a router.
To Next Page
Loading...
