Alcatel-Lucent OmniSwitch 6250 - Bridge Rrstp Ring Status

Distributed Spanning Tree Commands
page 16-116 OmniSwitch 6250 CLI Reference Guide November 2009
bridge rrstp ring status
Modifies the RRSTP status of an existing ring.
bridge rrstp ring ring_id status {enable | disable}
Syntax Definitions
ring_id A numeric value (1–128) that identifies the RRSTP ring.
enable Enables the RRSTP ring.
disable Disables the RRSTP ring.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The RRSTP status can also be modified by using bridge rrstp ring command.
Examples
-> bridge rrstp ring 1 status enable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vStpRrstpRingConfigTable
vStpRrstpRingId
vStpRrstpRingState
vStpRrstpRingRowStatus
Parameters Defaults
enable | disable disable
bridge rrstp ring Creates a RRSTP ring comprising of two ports.
show bridge rrstp ring Displays information for all the rings or a specific ring present in the
system.