Alcatel-Lucent OmniSwitch 6250 - Show Ip Multicast Source

IP Multicast Switching Commands
page 41-84 OmniSwitch 6250 CLI Reference Guide November 2009
show ip multicast source
Displays the IP Multicast Switching and Routing source table entries matching the specified IP multicast
group address or all entries if no IP multicast group address is specified.
show ip multicast source [ip_address]
Syntax Definitions
ip_address IP multicast group address.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ip multicast source
Total 1 Sources
Group Address Host Address Tunnel Address VLAN Port
---------------+---------------+---------------+-----+-----
228.0.0.1 1.0.0.2 0.0.0.0 1 2/1
-> show ip multicast source 228.0.0.1
Total 1 Sources
Group Address Host Address Tunnel Address VLAN Port
---------------+---------------+---------------+-----+-----
228.0.0.1 1.0.0.2 0.0.0.0 1 2/1
Release History
Release 6.6.1; command was introduced.
output definitions
Group Address IP group address of the IP multicast source.
Host Address IP host address of the IP multicast source.
Tunnel Address IP destination tunnel address of the IP multicast source.
VLAN VLAN associated with the IP multicast source.
Port The slot and port number of the IP multicast source.