IPv6 Commands
page 30-12 OmniSwitch 6250 CLI Reference Guide November 2009
ipv6 neighbor stale-lifetime
Configures the minimum lifetime for all neighbor entries.
ipv6 neighbor stale-lifetime stale-lifetime
Syntax Definitions
stale-lifetime Minimum lifetime for neighbor entries in the stale state (5–2800).
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> ipv6 neighbor stale-lifetime 1400
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
IPv6IfIndex
alaIPv6NeighborTable
alaIPv6NeighborStaleLifetime
parameter default
stale-lifetime 1440
show ipv6 neighbors Displays IPv6 Neighbor Table.
show ipv6 information Displays IPv6 information.
To Next Page
Loading...
