Alcatel-Lucent OmniSwitch 6250 - Ip Router-Discovery

RDP Commands
page 31-2 OmniSwitch 6250 CLI Reference Guide November 2009
ip router-discovery
Enables or disables the Router Discovery Protocol (RDP) for the switch.
ip router-discovery {enable | disable}
Syntax Definitions
enable Enables RDP on the switch.
disable Disables RDP on the switch.
Defaults
By default, RDP is disabled on the switch.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• The ip router-discovery command only activates RDP for the switch. No advertisements occur until
an IP interface is configured with RDP.
Examples
-> ip router-discovery enable
-> ip router-discovery disable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaRDPConfig
alaRDPStatus
ip router-discovery interface Enables or disables an RDP interface.