Session Management Commands
page 6-34 OmniSwitch 6250 CLI Reference Guide November 2009
show session xon-xoff
Displays whether the console port is enabled or disabled for XON-XOFF.
show session xon-xoff
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The switch may interpret noise from an RS232 line as Control-S (XOFF). If the console port is enabled for
XON-XOFF (through the session xon-xoff command), traffic to the console port may be stopped.
Examples
-> show session xon-xoff
XON-XOFF Enabled
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
sessionXonXoffEnable
session xon-xoff Enables/disables the XON-XOFF protocol on the console port.
To Next Page
Loading...
