Health Monitoring Commands
page 36-4 OmniSwitch 6250 CLI Reference Guide November 2009
health interval
Configures the sampling interval between health statistics checks. The sampling interval is the time inter-
val between polls of the switch’s consumable resources to see if it is performing within set thresholds.
health interval seconds
Syntax Definitions
seconds Sampling interval (in seconds). Valid entries are 1, 2, 3, 4, 5, 6, 10, 12,
15, 20, 30.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Decreasing the polling interval may impact switch performance.
Examples
-> health interval 6
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
HealthThreshInfo
healthSamplingInterval
parameter default
seconds 5
show health interval Displays the current health sampling interval.
To Next Page
Loading...
