IPv6 Commands
page 30-48 OmniSwitch 6250 CLI Reference Guide November 2009
show ipv6 traffic
Displays IPv6 traffic statistics.
show ipv6 traffic [if_name]
Syntax Definitions
if_name Interface name. Restricts the display to the specified interface instead of
global statistics.
Defaults
N/A.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The statistics show the cumulative totals since the last time the switch was powered on, the last reset of the
switch was executed or the traffic statistics were cleared using the command.
Examples
-> show ipv6 traffic
Global IPv6 Statistics
Packets received
Total = 598174
Header errors = 0
Too big = 12718
No route = 4
Address errors = 0
Unknown protocol = 0
Truncated packets = 0
Local discards = 0
Delivered to users = 582306
Reassembly needed = 0
Reassembled = 0
Reassembly failed = 0
Multicast Packets = 118
Packets sent
Forwarded = 3146
Generated = 432819
Local discards = 0
Fragmented = 0
Fragmentation failed = 0
Fragments generated = 0
Multicast packets = 265
To Next Page
Loading...
