Alcatel-Lucent OmniSwitch 6250 - User Password-Policy Min-Nonalpha

AAA Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 43-39
user password-policy min-nonalpha
Configures the minimum number of non-alphanumeric characters (symbols) required for a valid password.
user password-policy min-nonalpha number
Syntax Definitions
number The minimum number of non-alphanumeric characters.
The range is 0 to 7.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Specify 0 with this command to disable the minimum non-alphanumeric character requirement.
• The minimum number of non-alphanumeric characters is specified as part of a global password policy
that is applied to all passwords when they are created or modified.
Examples
-> user password-policy min-nonalpha 2
-> user password-policy min-nonalpha 0
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
aaaAsaConfig
aaaAsaPasswordMinNonAlpha
parameter default
number 0
show user password-policy Displays the global password policy configuration for the switch.