Policy Server Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 40-3
policy server flush
Removes all cached LDAP policy data from the switch.
policy server flush
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use this command to remove LDAP policies. Policies configured through the CLI or SNMP are not
removed.
Examples
-> policy server flush
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
serverPolicyDecision
policy server load Downloads policies from a LDAP server. These policies are created
through the PolicyView management application.
To Next Page
Loading...
