OmniSwitch 6250 CLI Reference Guide November 2009 page 9-1
9 Configuration File
Manager Commands
The Configuration Manager feature allows you to configure your switch using an ASCII-based text file.
CLI commands may be typed into a text document—referred to as a configuration file—and then uploaded
and applied to the switch.
MIB information for the Configuration Manager commands is as follows:
Filename: AlcatelIND1System.mib
Module: Alcatel-IND1ConfigMgr.mib
A summary of the available commands is listed here:
configuration apply
configuration error-file limit
show configuration status
configuration cancel
configuration syntax check
configuration snapshot
show configuration snapshot
write terminal
To Next Page
Loading...
