Alcatel-Lucent OmniSwitch 6250 - Show Ethoam Domain

Ethernet OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 25-37
show ethoam domain
Displays the information of a specific Management Domain configured on the bridge.
show ethoam domain {domain_name | mac_address}
Syntax Definitions
domain_name Specifies the domain name.
mac_address Specifies the CFM system MAC address.
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show ethoam domain esd.alcatel-lucent.com
MD Attributes
MD-Level : level-3,
MD-MHFstatus : mhfNone
Maintenance Association : alcatel-sales
Vlan : 100,
MA-MHFstatus : mhfNone,
CCM-interval : interval10s,
MEP-List(MEP-Id) : 3 4
Total number of MAs configured in this MD = 1
output definitions
MD-level The level at which the MD was created.
MD-MHFstatus Indicates whether the maintenance entity can create MHFs for this MD.
Options include none, explicit, or default.
Maintenance Association The name of the maintenance association.
Vlan The VLAN ID monitored by this MA. If the MA is not attached to any
VLAN, 0 will be displayed.
MA-MHFstatus Indicates whether the maintenance entity can create MHFs for this MA.
Options include none, explicit, or default.
CCM-interval The interval between the CCM transmissions.
MEP-Id Indicates the Maintenance End Point.