Port Mobility Commands
page 21-26 OmniSwitch 6250 CLI Reference Guide November 2009
vlan port authenticate
Enables or disables authentication on a mobile port.
vlan port slot/port authenticate {enable | disable}
Syntax Definitions
slot/port The slot number for the module and the physical mobile port number on
that module (e.g., 3/1 specifies port 1 on slot 3). To enter multiple slots
and ports in a single command, use a hyphen to specify a range of ports
(e.g., 3/1-16) and a space to specify multiple slots (e.g., 3/1-16 5/10-20
8/2-9).
enable Enable authentication on the specified mobile port.
disable Disable authentication on the specified mobile port.
Defaults
By default, authentication is disabled on mobile ports.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
At this time, authentication is only supported on mobile ports.
Examples
-> vlan port 3/1 authenticate enable
-> vlan port 5/2 authenticate disable
-> vlan port 6/1-32 8/10-24 9/3-14 authenticate enable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vMobilePortTable
vMobilePortIIfIndex
vMobilePortAuthenticate
vlan port mobile Configures Ethernet ports as mobile ports.
vlan port 802.1x Enables or disables 802.1X port-based access control on a mobile port.
show vlan port mobile Displays mobile port properties.
To Next Page
Loading...
