QoS Commands
OmniSwitch CLI Reference Guide November 2009 page 38-59
show qos slice
Displays rule availability and usage information for QoS slices of QoS slots. A slice is a logical section of
hardware and corresponds to particular ports on the interface.
show qos slice [slot/slice]
Syntax Definitions
slot/slice The slot number and slice for which you want to view information. The
number of slices per module varies depending on the type of module.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Information for all slots/slices is displayed unless a particular slot/slice is requested.
• This command is useful for monitoring switch resources required for policy rules.
Examples
-> show qos slice
Slot/ Ranges Rules Counters Meters
Slice Type Total/Free CAM Total/Free Total/Free Total/Free
3/0 Firebolt 16/16 0 128/101 128/101 64/64
1 128/125 128/125 64/64
2 128/0 128/0 64/64
3 128/0 128/0 64/64
4 128/0 128/0 64/64
5 128/0 128/0 64/64
6 128/0 128/0 64/64
7 128/0 128/0 64/64
8 128/0 128/0 64/64
9 128/0 128/0 64/64
10 128/0 128/0 64/64
11 128/0 128/0 64/64
12 128/0 128/0 64/64
13 128/0 128/24 64/64
14 128/0 128/62 64/64
15 128/124 128/123 64/63
output definitions
Slot/Slice The slot and slice number.
Type The type of slice.
Ranges Total The total number of TCP/UDP port ranges supported per slot/slice.
To Next Page
Loading...
