QoS Commands
page 38-60 OmniSwitch CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
N/A
Ranges Free The number of TCP/UDP port ranges that are still available for use.
CAM The CAM number.
Rules Total The total number of rules supported per CAM.
Rules Free The number of rules that are still available for use. On startup, the
switch uses 27 rules.
Counters Total The total number of counters supported per CAM.
Counter Free The number of counters that are still available for use.
Meters Total The total number of meters supported per CAM.
Meters Free The number of meters that are still available for use.
policy rule Configures a policy rule on the switch. A rule is made up of a condition
(for classifying incoming traffic) and an action (to be applied to outgo-
ing traffic).
output definitions (continued)
To Next Page
Loading...
