SNMP Commands
page 10-24 OmniSwitch 6250 CLI Reference Guide November 2009
snmp authentication trap
Enables or disables SNMP authentication failure trap forwarding.
snmp authentication trap {enable | disable}
Syntax Definitions
enable Enables authentication failure trap forwarding. When enabled, the
standard authentication failure trap is sent each time an SNMP
authentication failure is detected.
disable Disables authentication failure trap forwarding.
Defaults
By default, authentication failure trap forwarding is disabled.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> snmp authentication trap enable
-> snmp authentication trap disable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
snmpGroup
snmpEnableAuthenTraps
show snmp authentication trap Displays the current authentication failure trap forwarding status.
To Next Page
Loading...
