Link Aggregation Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 12-11
lacp linkagg name
Configures a name for a dynamic aggregate group.
lacp linkagg agg_num name name
lacp linkagg agg_num no name
Syntax Definitions
agg_num The number corresponding to the dynamic aggregate group.
name The name of the dynamic aggregate group. May be any alphanumeric
string up to 255 characters long. Spaces must be contained within
quotes (e.g., “Dynamic Group 1”).
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of this command to remove a name from a dynamic aggregate group.
Examples
-> lacp linkagg 2 name finance
-> lacp linkagg 2 no name
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggName
lacp linkagg size Creates a dynamic aggregate group.
show linkagg Displays information about static and dynamic (LACP) aggregate
groups.
To Next Page
Loading...
