DNS Commands
page 11-8 OmniSwitch 6250 CLI Reference Guide November 2009
show dns
Displays the current DNS resolver configuration and status.
show dns
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show dns
Resolver is : enabled
domainName : company.com
IPv4 nameServer(s): 189.202.191.14
: 189.202.191.15
: 188.255.19.1
IPv6 nameServer(s): fe2d::2c
: f302::3de1:1
: f1bc::202:fd40:f3
Release History
Release 6.6.1; command was introduced.
output definitions
Resolver is Indicates whether the DNS resolver is enabled or disabled.
domainName Indicates the default domain name assigned to the DNS lookups. This
value is set using the ip domain-name command.
IPv4 nameServer(s) Indicates the IP address(es) of the IPv4 DNS server(s). These addresses
are set using the ip name-server command.
IPv6 nameServer(s) Indicates the IPv6 address(es) of the IPv6 DNS server(s). These
addresses are set using the ipv6 name-server command.
To Next Page
Loading...
