Ethernet OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 25-39
show ethoam domain association
Displays the information of a specific MA in a Management Domain configured on the bridge.
show ethoam domain {domain_name | mac_address} association association_name
Syntax Definitions
domain_name Specifies the domain name.
mac_address Specifies the CFM system MAC address.
association_name Name of the Ethernet OAM Association.
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show ethoam domain esd.alcatel-lucent.com association alcatel-sales
Vlan : 100,
MA-MHFstatus : mhfNone,
CCM-interval : interval10s,
MEP-List(MEP-Id) : 3 4,
Legend: MEP-Id: * = Inactive Endpoint
MEP-ID Admin State Direction Mac-Address Port
--------+-----------+----------+-------------------+------
3 up up 00:D0:95:EC:84:B0 1/2
Total number of MEPs configured in this MA = 1
output definitions
Vlan The VLAN ID monitored by this MA. If the MA is not attached to any
VLAN, 0 will be displayed.
MA-MHFstatus Indicates whether the maintenance entity can create MHFs for this MA.
Options include none, explicit, or default.
CCM-interval The interval between the CCM transmissions.
MEP-ID Indicates the Maintenance End Point.
Admin State Indicates the administrative state (up or down) of the MEP.
To Next Page
Loading...
