Health Monitoring Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 36-9
show health
Displays the health statistics for the switch. Statistics are displayed as percentages of total resource capac-
ity and represent data taken from the last sampling interval.
show health [slot/port] [statistics]
Syntax Definitions
slot/port To view a specific slot, enter the slot number (e.g., 3). To view a
specific port, enter the slot and port number (e.g., 3/1).
statistics Optional command syntax. It displays the same information as the show
health command.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• If no slot/port information is specified, the aggregate health statistics for all ports is displayed.
• Use the health statistics reset command to reset health statistics for the switch.
Examples
-> show health
* - current value exceeds threshold
Device 1 Min 1 Hr 1 Hr
Resources Limit Curr Avg Avg Max
----------------+-------+-----+------+-----+-----+-------
Receive 80 01 01 01 01
Transmit/Receive 80 01 01 01 01
Memory 80 66 66 66 66
CPU 80 41 40 32 30
Temperature Cmm 50 33 33 33 33
Temperature Cmm Cpu 50 32 32 32 32
-> show health 4/3
* - current value exceeds threshold
Port 04/03 1 Min 1 Hr 1 Hr
Resources Limit Curr Avg Avg Max
----------------+-------+-----+-------+-----+-------
Receive 80 01 01 01 01
Transmit/Receive 80 01 01 01 01
To Next Page
Loading...
