Ethernet OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 25-11
ethoam association ccm-interval
Modifies the Continuity Check Message (CCM) transmission interval of an Ethernet OAM Maintenance
Association.
ethoam association association_name domain {domain_name | mac_address}
ccm-interval {interval-invalid | interval1s | interval10s | interval1m | interval10m}
Syntax Definitions
association_name Name of the Ethernet OAM Association. Up to 48 (minus the domain
name length) characters may be used.
domain_name Specifies the domain name. For more information on the different
formats of the domain name, refer to ethoam domain command on
page 25-3.
mac_address Specifies the CFM system MAC address.
interval-invalid Specifies that no CCMs are sent by a MEP
interval1s Specifies that CCMs are sent every 1 second.
interval10s Specifies that CCMs are sent every 10 seconds.
interval1m Specifies that CCMs are sent every minute.
interval10m Specifies that CCMs are sent every 10 minutes.
Defaults
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
The association_name should be unique amid all those used by or available to the service provider within
a domain.
Examples
-> ethoam association alcatel-sales domain esd.alcatel-lucent.com ccm-interval
interval10s
Release History
Release 6.6.1; command was introduced.
parameter default
interval-invalid | interval1s |
interval10s | interval1m |
interval10m
interval10s
To Next Page
Loading...
