Power over Ethernet (PoE) Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 4-13
lanpower combo-port
Enables or disables PoE capability on the copper combo ports.
lanpower slot combo-port {enable | disable}
Syntax Definitions
slot The particular slot on which to enable or disable PoE capability on the
copper combo ports.
enable Enables PoE capability on the copper combo ports 25/26 and disables
PoE capability on ports 23/24.
disable Disables PoE capability on the copper combo ports 25/26 and enables
PoE capability on ports 23/24.
Defaults
Platforms Supported
OmniSwitch 6250-Enterprise Models
Usage Guidelines
Port pairs 23/24 and 25/26 cannot have PoE enabled at the same time. Use this command to choose which
port pairs will support PoE.
Examples
-> lanpower 1 combo-port enable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
parameter default
enable | disable disable
show lanpower Displays current inline power status and related statistics for
all PoE ports in a specified slot.
To Next Page
Loading...
