802.1AB Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 13-31
show lldp remote-system
Displays per local port and information of remote system.
show lldp [slot/port | slot] remote-system
Syntax Definitions
slot/port Slot number for the module and physical port number on that module
(e.g., 3/1 specifies port 1 on slot 3).
slot The slot number for a specific module.
Defaults
By default, a list of all lldp ports is displayed.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show lldp remote-system
Remote LLDP Agents on Local Slot/Port: 2/47,
Chassis ID Subtype = 4 (MAC Address),
Chassis ID = 00:d0:95:e9:c9:2e,
Port ID Subtype = 7 (Locally assigned),
Port ID = 2048,
Port Description = (null),
System Name = (null),
System Description = (null),
Capabilites Supported = none supported,
Capabilites Enabled = none enabled,
Remote LLDP Agents on Local Slot/Port: 2/48,
Chassis ID Subtype = 4 (MAC Address),
Chassis ID = 00:d0:95:e9:c9:2e,
Port ID Subtype = 7 (Locally assigned),
Port ID = 2047,
Port Description = (null),
System Name = (null),
System Description = (null),
Capabilites Supported = none supported,
Capabilites Enabled = none enabled,
To Next Page
Loading...
