Session Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 6-37
show more
Shows the enable status of the more mode along with the number of lines specified for the screen display.
show more
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• This command shows the enable status of the more mode.
• The number of lines displayed is the value set with the more size command.
Examples
-> show more
The more feature is enabled and the number of line is set to 12
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
SystemServices
systemServicesArg1
systemServicesAction
more Enables the more mode for your console screen display.
more size Specifies the number of lines that your console screen will display.
To Next Page
Loading...
