Session Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 6-13
show prefix
Shows the command prefix (if any) currently stored by the CLI. Prefixes are stored for command families
that support the prefix recognition feature.
show prefix
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Prefixes are stored for command families that support the prefix recognition feature. These command
families include AAA, Interface, Link Aggregation, QoS, Spanning Tree, and VLAN Management. Other
command families do not store a prefix.
Examples
-> show prefix
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
N/A
prompt This command defines the format of the CLI prompt. The prompt
can be defined to include the command prefix.
To Next Page
Loading...
