IPv6 Commands
page 30-38 OmniSwitch 6250 CLI Reference Guide November 2009
clear ipv6 neighbors
Removes all entries, except static entries, from IPv6 Neighbor Table.
clear ipv6 neighbors
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This commands only clears dynamic entries. If static entries have been added to the table, they must be
removed using the no form of the ipv6 neighbor command.
Examples
-> clear ipv6 neighbors
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaIPv6NeighborTable
alaIPv6ClearNeighbors
ipv6 neighbor Configures a static entry in IPv6 Neighbor Table.
show ipv6 neighbors Displays IPv6 Neighbor Table.
To Next Page
Loading...
