Alcatel-Lucent OmniSwitch 6250 - Chapter 8 Web Management Commands

OmniSwitch 6250 CLI Reference Guide November 2009 page 8-1
8 Web Management
Commands
The switch can be configured and monitored using WebView, which is a web-based device management
tool. Web Management CLI commands allow you to enable/disable web-based management and config-
ure certain WebView parameters, such as Secure Socket Layer (SSL).
MIB information for the Web Management commands is as follows:
Filename: AlcatelInd1WebMgt.mib
Module: alcatelIND1WebMgtMIB
A summary of the available commands is listed here:
http server
http ssl
http port
https port
debug http sessiondb
show http