Session Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 6-19
history size
Sets the number of commands that will be stored in the CLI’s history buffer.
history size number
Syntax Definitions
number Enter an integer between 1 and 500. The history buffer can store up to
500 commands.
Defaults
By default, the history buffer size is set to 100 commands.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> history size 10
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
N/A
show history Displays commands that you have recently issued to the switch. The
commands are displayed in a numbered list.
! Recalls commands listed in the history buffer and displays them at
the CLI prompt.
To Next Page
Loading...
