Alcatel-Lucent OmniSwitch 6250 - 802.1 AB Commands; Lldp Transmit Interval

802.1AB Commands
page 13-2 OmniSwitch 6250 CLI Reference Guide November 2009
lldp transmit interval
Sets the transmit time interval for LLDPDUs.
lldp transmit interval seconds
Syntax Definitions
seconds The transmit interval between LLDPDUs, in seconds. The valid range is
5 - 32768.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The LLDP protocol must be enabled before using this command.
Examples
-> lldp transmit interval 40
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
lldpConfiguration
lldpMessageTxInterval
parameter default
seconds 30
lldp transmit hold-multiplier Sets the transmit hold multiplier value, which is used to calculate the
Time To Live TLV.
show lldp local -system Displays local system information.