Alcatel-Lucent OmniSwitch 6250 - Ip Rip Route-Tag

RIP Commands
page 33-16 OmniSwitch 6250 CLI Reference Guide November 2009
ip rip route-tag
Configures the route tag value for RIP routes generated by the switch.
ip rip route-tag value
Syntax Definitions
value Route tag value. Valid range is 0–2147483647.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Only RIPv2 supports route tags.
Examples
-> ip rip route-tag 0
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaRipRedistRouteTag
parameter default
value 0
show ip rip Displays the RIP status and general configuration parameters (e.g.,
forced hold-down timer).