QoS Commands
OmniSwitch CLI Reference Guide November 2009 page 38-63
show qos config
Displays global information about the QoS configuration.
show qos config
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use this command to view the current global configuration for QoS. Use the show qos statistics
command to view statistics about the QoS software in the switch.
Examples
-> show qos config
QoS Configuration:
Enabled : Yes
Pending changes : None
Classifier:
Default queues : 8
Default queue service : strict-priority
Trusted ports : No
NMS Priority : Yes
Phones : trusted
Default bridged disposition : accept
Default IGMP/MLD disposition : accept
Logging:
Log lines : 256
Log level : 6
Log to console : No
Forward log : No
Stats interval : 60 seconds
Userports:
Filter : spoof
Shutdown: none
Quarantine Manager:
Quarantine MAC Group : Quarantined
Quarantined Page : No
Remediation URL :
Debug : info
To Next Page
Loading...
