OmniSwitch 6250 CLI Reference Guide November 2009 page 43-1
43 AAA Commands
This chapter includes descriptions for authentication, authorization, and accounting (AAA) commands.
The commands are used for configuring the type of authentication as well as the AAA servers and the
local user database on the switch.
• Authenticated Switch Access. Authenticates users into the switch to manage the switch. User informa-
tion is stored on a RADIUS, TACACS+, LDAP, or ACE/Server; or information may be stored locally
in the switch user database.
• Local user database. User information may be configured for Authenticated Switch Access. For
functional management access, users may be allowed to access specific command families or domains.
Alternately, users may be configured with a profile that specifies access to particular ports or VLANs.
MIB information for the AAA commands is as follows:
Filename: alcatelIND1AAA.mib
Module: ALCATEL-IND1-AAA-MIB
A summary of the available commands is listed here:
Authentication servers aaa radius-server
aaa tacacs+-server
aaa ldap-server
aaa ace-server clear
show aaa server
Authenticated Switch Access aaa authentication
aaa authentication default
aaa accounting session
aaa accounting command
show aaa authentication
show aaa accounting
802.1X Port-Based Network
Access Control
aaa authentication 802.1x
aaa authentication mac
aaa accounting 802.1x
show aaa authentication mac
show aaa accounting 802.1x
Local User Database and
Partitioned Management
user
password
user password-size min
user password-expiration
show user
show aaa priv hexa
To Next Page
Loading...
