Chassis Management and Monitoring Commands
page 2-6 OmniSwitch 6250 CLI Reference Guide November 2009
system date
Displays or modifies the switch’s current system date.
system date [mm/dd/yyyy]
Syntax Definitions
mm/dd/yyyy The new date being specified for the system. Enter the date in the
following format: mm/dd/yyyy, where mm is the month, dd is the day,
and yyyy is the year. For example, 08/08/2005.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• If you do not specify a new system date in the command line, the current system date will be displayed.
• For more information on setting time zone parameters (e.g., Daylight Savings Time), refer to the
system timezone command on page 2-9.
Examples
-> system date 08/08/2005
-> system date
08/08/2005
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
systemServices
systemServicesDate
system time Displays or modifies the switch’s current system time.
system timezone Displays or modifies the time zone for the switch.
To Next Page
Loading...
