Alcatel-Lucent OmniSwitch 6250 - Show Port Mapping Status

Port Mapping Commands
page 28-8 OmniSwitch 6250 CLI Reference Guide November 2009
show port mapping status
Displays the status of one or more port mapping sessions.
show port mapping [port_mapping_sessionid] status
Syntax definitions
port_mapping_sessionid The port mapping session ID. Valid range is 1 to 8.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not specify the port mapping session ID, then the status of all the port mapping sessions will be
displayed.
Examples
-> show port mapping status
SessionID Direction Status
-------------+----------------+---------------
8 bi disable
Release History
Release 6.6.1; command was introduced.
output definitions
SessionID Displays the port mapping session ID.
Direction Displays the direction of a port mapping session.
Status Displays status of a port mapping session.