Alcatel-Lucent OmniSwitch 6250 - Interfaces Clear-Violation-All

Ethernet Port Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 20-25
interfaces clear-violation-all
Clears all port violations set by various applications on the switch for the given port.
interfaces slot[/port[-port2]] clear-violation-all
Syntax Definitions
slot Slot number you want to configure.
port Port number of the interface you want to configure.
port2 Last port number in a range of ports you want to configure.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
All application violations associated with a specific port are cleared when this command is used.
Examples
-> interfaces 1/3 clear-violations-all
-> interfaces 1 clear-violations-all
-> interfaces 1/3-7 clear-violations-all
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
esmConfTable
esmPortViolationClearAll
show interfaces port Displays interface port status.