Alcatel-Lucent OmniSwitch 6250 - Qos Port Reset

QoS Commands
OmniSwitch CLI Reference Guide November 2009 page 38-35
qos port reset
Resets all QoS port configuration to the default values.
qos port slot/port reset
Syntax Definitions
slot/port The physical slot and port number. For example: 3/1.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The QoS port configuration parameters that are reset include:
Examples
-> qos port 3/1 reset
Release History
Release 6.6.1; command was introduced.
MIB Objects
alaQoSPortTable
alaQoSPortSlot
alaQoSPortPort
alaQoSPortReset
parameter default
default queues 8 (6 on an
OmniSwitch 6800)
trusted not trusted